Contact Adhesive - C2626 - 1 Litre

Price for 1 unit: £20.68
Ex. VAT: £17.23
Product Datasheet:
Download PDF

Not sure this is the right adhesive for your requirements?

Please contact our friendly team for some free advice about your individual requirements.

Product Overview

Contact Adhesive C2626 is a single-component brushable contact adhesive, suitable for a range of internal and external applications. It will bond all grades of timber and most plastics.

Typical uses

Contact Adhesive C2626 is extremely versatile and it is ideal for:

  • Bonding decorative laminates to wood composites
  • Hard furnishings
  • Cotton-backed vinyl
  • Most metals
  • Professional and DIY hobbyist for general purposes
  • Shop fitting
  • Kitchen fitting
  • General repairs
  • Bonding all grades of timber and most plastics

Heat resistant

This brush-on contact adhesive has excellent heat-resistant adhesion properties

Immediate handling & long open time

The high initial bond-strength of C2626 allows the immediate handling of joined substrates, whilst its long open tack-time of up to 20 minutes gives the flexibility you need to allow for unforeseeable delays. This makes C2626 perfect for manual applications.

No equipment needed

It minimises cost and waste as this contact adhesive is perfect for manual applications. Consequently, there is no need for expensive specialist equipment to apply C2626 contact adhesive. It is quickly and easily applied - all you need is a brush, which helps to minimise costs.

High viscosity

C2626 contact adhesive also has a high viscosity, which ensures a mess-free, waste-free, non-drip application.

Available sizes

This contact glue is available in the following sizes:

Adhesive information

Change based on variation

Base Polychloroprene
Appearance Neutral
Application Temperature 5°C - 30°C
Application Methods Brush
Coverage 4m2
Temperate Resistance -30°C to 90°C
Viscosity 6000 cPs
Tack Life 5 - 20 minutes
Storage information 5°C - 25°C

Directions for Use

Ensure surfaces to be bonded are clean and free from grease and other contaminants.

  1. Condition materials to be bonded in the bonding environment overnight
  2. Stir C2626 before use
  3. Apply a thin, even coat of adhesive to the surfaces of both substrates using a short stiff brush
  4. Align the panel edges and bond under maximum pressure as soon as the surfaces become ‘touch dry’ (adhesive is glossy and no longer transfers to the knuckles)
  5. Laminates should be nip-rolled or platen-pressed for best results. If this is not possible, use a hard roller and go over the entire working surface with as much bodyweight as possible. Seams and edges should always receive extra pressure. If possible, sandwich the panel edge between wooden battens and use G-clamps

Contact adhesive price

If you buy this adhesive in bulk it can cost from only £16.54 / tin.

Not sure if this Contact adhesive is right for your requirements?

If you are not sure if this adhesive is correct for your requirements please contact us to discuss your requirements and we can point you in the right direction.


01143951004 01152000565 01214616076 01332482732 02477350519