High Performance Hot Melt Adhesive H1002 is a high-performance, very flexible, clear glue stick. It is particularly suitable for bonding materials such as paper, board, timber, hardboard, foams, ABS, Perspex, aluminium and other porous and non-porous materials.
Good flow characteristics
High Performance Hot Melt H1002 has good flow characteristics, aggressive tack and high UV light stability.
Suitable for food packaging
High Performance Hot Melt H1002 is acceptable under Section 175.105 of the USA FDA regulations for use as a food packaging adhesive.
Suitable for general packaging
H1002 also meets the requirements of U.K. Ministry of Defence Standard 80-167 Issue 1 (replaces 10155): Adhesive, Hot melt for packaging purposes.
High Performance Hot Melt H1002 has been specifically designed for the bonding of difficult surfaces, or where a flexible, high-tack bond is required. It can be used for or on:
- Packaging applications
- Within the food packaging industry
- Product assembly
- Porous and non-porous materials
- High Performance hot melt
- Woodworking hot melt
- Joinery hot melt
- FDA approved hot melt
- Food packaging hot melt
- Food safe hot melt
- Food safe glue
- Food packing glue
- Food packing adhesive
- Food safe adhesive
- Printing hotmelt
The 5kg box contains approximately 160-170 sticks of hot melt.
|Viscosity @200°C in poise||160 poise Brookfield RVT Thermosel|
|Softening Point in °C||80°C (Ring & Ball)|
|Working Temperature||150°C - 210°C|
|Open Time||Up to 60 seconds (depending on amount applied and application temperature)|
|Max Storage Temperature||30°C|
|Colour||Clear / Translucent|
|Heat Resistance||-25°C to +65°C|
Not sure if this Hot Melt Adhesive is right for your requirements?
If you are not sure if this adhesive box is correct for your requirements please contact us to discuss your requirements and we can point you in the right direction.