PETG / Acrylic Adhesive WC123 is fast curing, clear and specifically formulated to bond PETG and acrylic to itself and other substrates.
The adhesive is supplied ready for use and is best applied by brush or bottle with a suitable dosing tip or syringe. All surfaces to be adhered must be dry and free from grease. Degrease with a suitable degreaser. If the adhesive is “wicked” into the joint, slight forward and backwards motion until the adhesive “bites” will speed up the cure. Ideally, a pressure of 80 kilos per square metre should be applied over the bonded area.
- Very Low Viscosity
- Fast Curing
|Bonds||PETG and Acrylic|
|Coverage||3-4 sq. m per 500ml|