Product Assembly Hot Melt Adhesive H1007 is a high performance hot melt adhesive glue, specifically designed for product assembly and packaging operations.
It is suitable for bonding materials such as paper, board, timber, ceramic tiles to display boards, hardboard, foams, ABS polymers, Perspex, aluminium, and other porous and non-porous materials.
This product assembly hot melt glue has a yellow colouring. It is flexible, with good flow characteristics and aggressive tack.
Suitable for food packaging
Product Assembly Hot Melt H1007 acceptable under Section 175.105 of the USA FDA regulations for use as a food packaging adhesive.
This glue is suitable for:
- Packaging applications
- Difficult surfaces within food packaging
- Product assembly markets
- Paper & board
- Ceramic tiles to display boards
- Other porous and non-porous materials
The 5kg box contains approximately 160 – 170 sticks of Product Assembly Hot Melt H1007.
Known or used as
This glue is known as or used for:
- Product Assembly Hot Melt
- High performance hot melt
- Packaging hot melt
- Product assembly glue
- Food safe hot melt
- FDA approved hot melt
- Paper hot melt
- Perspex hot melt
- ABS plastic hot melt
- Plastic hot melt
|Colour||Translucent / yellow|
|Viscosity @200°C in poise||35 poise Brookfield RVT Thermosel|
|Softening Point||91°C (Ring & Ball)|
|Heat Resistance||-40°C to +70°C|
|Working Temperature||150°C – 210°C|
|Open time||Up to 40 seconds (depending on amount applied and application temperature)|
|Maximum Storage Temperature||30°C|
H1007 is acceptable under Section 175.105 of the USA FDA regulations for use as a food packaging adhesive. Fumes should not be inhaled. Use in a well ventilated area. Avoid ingestion. If ingestion occurs, seek medical advice.
Not sure if this Hot Melt Glue is right for your requirements?
If you are not sure if this adhesive is correct for your requirements please contact us to discuss your requirements and we can point you in the right direction.