surface preparation Archives - Page 2 of 2

Why does an ABS repair that appears visually sound often suffer catastrophic failure under a 5 MPa load within 48 hours?
Experience since the 1990s…

What if the primary cause of your structural 20 MPa bond failure isn’t the adhesive itself, but a surface energy mismatch of less than 10…

What if a single bond failure, occurring in 1 per cent of your production, from an unreliable structural epoxy resin supplier, causes a 48-hour…

What if 80% of your structural bond failures could be eliminated by a single 30-second cleaning step? You’ll be glad to hear that most industrial…

What if your structural bond could withstand thermal expansion cycles of up to 200°C without the stress concentrations caused by traditional…