Lucy, Author at Bondrite Adhesives

What if the primary cause of your structural 20 MPa bond failure isn’t the adhesive itself, but a surface energy mismatch of less than 10…

The traditional spot weld might be the weakest link in your 2026 production line when evaluating adhesive bonding vs spot welding for thin-gauge…

Experience since the 1990s shows that 70% of adhesive failures in industrial applications stem from incorrect substrate preparation rather than the…

Laboratory testing confirms that 60% of industrial bond failures result from selecting a tape thickness that fails to compensate for substrate…

Rapid bond failure occurring within 24 hours is rarely a product defect; it’s typically a failure of technical specification documented in ISO 9001…

What if your bond failures in humid environments where relative humidity exceeds 65 percent are caused by using a D3 pva adhesive when the moisture…

Professional hot melt glue guns that fail to maintain a stable operating temperature of 210 degrees Celsius can cause a 35 per cent drop in adhesive…

What if a single bond failure, occurring in 1 per cent of your production, from an unreliable structural epoxy resin supplier, causes a 48-hour…

Welding and riveting are no longer the only options for achieving a structural bond, as a high-performance 2 part epoxy adhesive for metal can…

A bond that fails exactly 182 days after installation is not a product defect; it is a failure of the 12-page technical specification for your…