Aluminium Epoxy Putty Sticks, S1011, are hand-kneaded, non-rusting epoxy putty sticks that mix in one minute to provide fast, permanent repairs to items made of ferrous and aluminium metals. Our sticks are great value as they are approximately 130g, 175mm long and 22mm diameter which is larger than most on the market.
Each aluminium epoxy stick comes in a handy rod form with the curing agent encapsulated in the contrasting colour base material. Its putty-like consistency eliminates drips and runs, providing a no-mess application with no tools required to use. It is a blackish in colour after use.
Ideal for emergency repairs
S1011 is ideal for making emergency repairs to reforming, rebuilding and patching anything made out of aluminium such as HVAC parts, refrigeration units, air conditioning units, machine parts, alu-roofing and siding, flagpoles, shelving, platforms, walkways, campers, road vehicles, canopies, gutters, truck and trailer bodies, wheels, manifolds, stripped threads, marine hardware and casings.
Will not Yellow over time
The mixed epoxy turns from a silvery colour to “alloy” upon curing and will not yellow upon exposure to UV light.
Typical application uses
After proper mixing, Bondrite’s Aluminium Epoxy Sticks mould like clay and may be used in many industrial and home maintenance applications, including:
- Repair of iron pipes
- Tools and equipment
- Repair blow holes
- Holding and placement of fixtures and signs
- Repairs to moulds and injection type shapes
- Patterns and castings
- Making prototypes
- Repair cracked castings
- Repairs to down spouts and gutters
- Light fixture installations
- Repairs to duct-work
- Anchor bolts
- Patch dents
- Emergency repairs
- Fill scratches, cuts gouges & holes
- There are also countless other uses
Aluminium epoxy putty price
This product comes with bulk buying options offering a discounted rate making them even better value for money.
Can be drilled
After final cure, S1011 may be drilled, sawed, tapped, filed, sanded and painted. It allows patching in areas where welding is impossible.
Stable with longevity
The unused portion of Aluminium Stick will remain stable for years if protected from direct contact with the air, in cool conditions.
How to apply this putty?
When applying S1011 to surfaces it is necessary to work the material forcefully into the surface and apply pressure until adhesion begins to take effect. The lower the temperature, the longer it takes to cure.
|Resin||Epoxide Light Silver Epoxy|
|Resistant to||Hydrocarbons, ketones, esters, halo-carbons, alcohols, aqueous salt, solutions and dilute acids and bases|
|Electrical Resistance||30,000 mega Ohms Dielectric|
|Shelf life||>6 months @ 25°C|
How to store this Aluminium putty?
Store in cool conditions, preferably away from direct sunlight or excessive heat.
|Initial Cure||1 hour max|
|Full Cure Time||24 hours|
|Lap shear strength (steel)||4.8 N/mm2|
|Shore D Hardness||70/80|
|Compressive Strength||84 N/mm2 to 12,000 psi|
|Opening time||5 minutes|
|Max. temperature resistance||120°C continuous | 150°C intermittent|
Health and safety information
Please note this is an irritant: Contains epoxy resin and may cause skin irritation in sensitive individuals. Unnecessary skin contact should therefore be avoided. If skin contact occurs, wash with a proprietary hand cleaner such as Swarfega, followed by washing with soap and water. In case of eye contact, flush with clean water for at least 15 minutes, then seek medical attention.
When fully cured, the product can be considered non-toxic.
How to use this Epoxy putty?
Mixing: Twist or cut off required amount. To mix, knead with fingers to a uniformed colour. If mixing is difficult, warm to room temperature or slightly above. Apply to the surface to be repaired (within 2 minutes of mixing). The mixed epoxy does not exhibit high bond strength at this point, but appears to be merely lying on the surface. Force into any cracks or holes to be filled and strike off excess material, preferably with a tool wetted with clean water. Work the material forcefully into the surface and apply pressure until adhesion begins to take effect.
For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening. Remove excess material before hardening begins. After 15-20 minutes the epoxy will harden like metal and start to form a tenacious bond. After just 45 minutes it is completely cured and can be drilled, sawed, carved, sanded, stained or painted.
In order to achieve optimum adhesion, surface should be cleaned free of grease or dirt. Scuffing or sanding the surface prior to cleaning helps to ensure a good bond.
Not sure if this Aluminium Epoxy Stick is right for your requirements?
If you are not sure if this Aluminium Epoxy Stick is correct for your requirements please contact us to discuss your requirements and we can point you in the right direction.